The tapping machine is of course a good servo, with the following advantages:1. Tapping depth setting Before tapping, corresponding data can be entered on the control interface according to the depth requirements of the tapping. The tapping machine will automatically tap to the set depth and exit automatically based on the input control data. You can confidently tap blind hole threads, greatly reducing labor intensity and operator technical requirements.

Tapping machine is a type of machine tool that uses taps to manufacture internal threads, and it is the most widely used type of internal thread machine tool. Due to the different states of each tap in the tapping machine, it is common for some taps to wear out and break due to increased torque, resulting in the scrapping of the workpiece. Sometimes even those workpieces that have undergone various precision processes for a long time are scrapped due to the breakage of the tap during the tapping machine process, resulting in a large amount of waste.

Tapping: Making internal screw patterns is called tapping, and its tool is called thread tapping.Threading: Making external threads is threading, and the tool is a wrench.Key points of tapping:(1) The hole opening of the threaded bottom hole on the workpiece should be chamfered, and both ends of the through-hole thread should be chamfered.