The tapping machine is of course a good servo, with the following advantages:
1. Tapping depth setting
Before tapping, corresponding data can be entered on the control interface according to the depth requirements of the tapping. The tapping machine will automatically tap to the set depth and exit automatically based on the input control data. You can confidently tap blind hole threads, greatly reducing labor intensity and operator technical requirements.
2. Tapping speed setting
The speed setting of the servo tapping machine adopts a DC analog voltage input setting, which can achieve stepless speed regulation of the spindle and feed (within the highest speed range)
3. Universal adjustment setting
The servo tapping machine can be installed in any position for tapping and is easy to operate.
4. Safety clamp torque setting
The wire tapping chuck has overload protection function, making the tap less likely to break.
5. Overload protection for servo motor
The motor automatically alarms and stops working under overload and overcurrent conditions to avoid damage to the motor caused by overcurrent and overload.
6. The pitch size can be changed freely
The servo tapping machine can process any metric or imperial thread, and can also process any pitch specification by changing the set of small gears.
